Single-use Sterilised Medical Use Isolation Gown

CE Certified 

ISO manufacturing standards 

[Structure And Composition] Disposable protective suit is mainly made of non-woven sewing and bounding.

[Application] For patients with potential infectious blood, body fluids, secretions that clinical medical personnel come into contact with while working. For blocking and protection. 

[Performance Indicators] 

1. Liquid barrier function:

a) The hydrostatic pressure in key parts shall be no less than 1.67kpa (17cmH20）。

b) Moisture permeability of the material It should not be less than 2500g/(m2 d).

2. The resistance of protective clothing to synthetic blood penetration should be no less than 1.75kPa.

3. The water level on the outer side shall not be lower than level 3.

4. Elongation at break: the elongation at break of the key parts of the material should not be less than 15%.

5. The filtration efficiency of non-oil particles in key parts and joints should be no less than 70%.

6. Antistatic: the charge shall be no more than 0.6 C/piece. 

7. Electrostatic attenuation performance: the electrostatic attenuation time shall not exceed 0.5s.

8. Residual ethylene oxide

[Usage] Unfold the protective clothing, unzip the zipper, extend your legs from the opening of the zipper in turn, then put on the jacket, and extend your hand from the sleeve. Put on your head and zip it from the front of your chest.

[Storage Conditions]

The product should be stored in the non-corrosive gas, dry, avoid the sun, good ventilation, clean environment, far away from the flame. 

Manufacturing standard: GB 19082 - 2009